Golf Shirts Basics And How To Look Like A Gentleman On The Greens

GOLF SHIRTS Jerseys are iconic for basketball. Uniforms are essential for baseball. Swimsuits are basic for swimming. And for the gentleman’s game of golf? Just wearing a loose and untucked shirt could get you thrown off the green. Whether you’re a serious golfer or not, everyone adheres to the etiquette of the game and that includes wearing collared golf shirts.

This modest game started out with men playing in suits. Men used to wear long trousers complemented with collared shirts with ties underneath their morning coats back in the 1800’s. Styles have evolved throughout the years but the collared shirts for golf remained to symbolize the conservative sport.

Polo Shirts vs. Golf shirts

Now, most people would think that a regular polo shirt would be enough. If you look at it, there are barely any differences between ordinary polo shirts and golf shirts. But the subtle differences can impact how you feel when playing golf. As they say, you must dress the part to play the part. The following distinctions can help you differentiate one from the other:

  1. Shirts for golf are made of moisture-wicking fabric.

Moisture-wicking fabrics pull moisture away from the skin. Most active wear are designed with this type of textile. Shirts for playing golf, in particular, are made of 50/50 cotton and polyester blend or 100% polyester to aid players when sweating through the 9-hole or 18-hole course.

  1. Golf shirt collars are meant to stay down.

The collar and the sleeve cuffs on these shirts are double-stitched, intended to stay flat and loose. On polo shirts, however, the collars are typically soft-welted with cuffs that can be turned up when the sun is glaring at your neck. Warning: pop up that collar at your own fashion risk. But on the green, the collar stays down.

  1. Shirts for golf have breast pockets.

Though styles through the ages have made breast pockets optional, if not obsolete, the breast pocket was placed there for functionality. It goes on the left side of the shirt and is meant to hold the scorecard and the pencil. Today, most collared shirts for golf keep the design simple. This is why polo shirts, tennis shirts, and golf shirts are said to be interchangeable.

Putting the Look Together

Of course, wearing the collared shirt doesn’t just make you look like a golfer instantly. It’s not called a gentleman’s sport if you’re just going to wear jogging pants or slippers with that clean shirt. Looking like a gentleman means looking sleek and coordinated from top to bottom. Here’s a few styling tips:

  1. GolfShirts need to be tucked in.

It’s not just about wearing proper clothing. How you wear it matters too and when it comes to golf, you need to tuck in that shirt. Dressing sharply gives the look of confidence and professionalism which are both highly regarded in this sport.

  1. Wear good-fitting trousers or shorts.

Golf looks like a dressy sport because a true golfer wears good-fitting apparel. When it comes to trousers, the appropriate length would be having the bottom of the pants meet just the top of the shoes. If you’re going with shorts, it should fall just above your kneecaps.

  1. You can’t go wrong with khakis.

If you’re one who isn’t picky and doesn’t like comprehending what color of pants goes with a patterned golf shirt, a pair of khakis won’t lead you astray. Its versatility allows you to pair it with almost anything. It also adheres to a good gentleman’s style rule: simple, simple, simple.

  1. Socks should come just right on your ankles.

Golf shoes are not sneakers. These are lighter and usually with special soles for traction if not made with plastic spikes. Socks should go up by the ankles or should be worn just under the shoe for the right fit.

In golf, the way you present yourself is as important as your performance. Dressing appropriately is a sign of respecting the game and being a true gentleman. By starting with collared golf shirts, you don’t only dress to impress, you also dress to play the game.

History Of Cremation

Cremation Cremation is the process wherein dead bodies are burned and broken down to basic chemical compounds which could resemble ashes. In turn, these ashes are placed in a small container (called an urn), which could be then buried or be kept with the deceased person’s family. It has since become one of the popular alternatives to traditional funeral services and burials, though it in itself is not considered to be a burial.

Places where cremation could be done are called crematoriums, though there are places in other parts of the world that burn the deceased’s bodies in funeral pyres built out in the open.

History

Historians have found evidence of the ritual of cremation as far back as 20,000 years ago. The Mungo Lady, whose partially-cremated remains were found in Mungo Lake in Australia, stands to be one of the oldest recorded instances of cremation to date.

Different civilizations have practiced different funeral and burial customs and not all of them adopted cremation as a means of disposing of their dead. The Ancient Egyptians, for example, believed that the soul’s form was tied to the body’s, and thus never cremated their dead. However, researchers have found that Early Persians and the Phoenicians cremated their dead, and that this practice was also evident during the early Bonze Age.

In Ancient Greece and Rome, burial was more common and cremation was reserved for those in the upper class or the royalty. With the spread of Christianity, cremating a person’s body faded from practice, as its roots of Judaism prohibited it. At this time, entombment was once again the preferred burial practice. This continued throughout the Middle Ages (though some Christians used it as a means to punish the souls of those that were judged as heretics).

As time passed, cremating the remains of the deceased became used in order to prevent the spread of disease. It also became used as a method of disposal in times of war. Nazis disposed of their victims this way, even resorting to mass cremation in order to save themselves the trouble of massive burial graves.

Sir Thomas Browne was one of the first in the modern era to vocally advocate the practice of cremating the deceased’s remains in 1658. He was followed by Sir Henry Thompson (a baronet and a surgeon and physician to Queen Victoria), who became interested when he went to the Vienna Exposition in 1873 and saw the model of a cremating apparatus. He stated that cremating a dead person would greatly reduce the cost of funeral services, prevent premature burial, prevent the propagation of disease, and that the urns where the ashes will be kept will be saved from vandalism. With some other advocates, he formed the Cremation Society of Great Britain. However, cremating a body at this time was still seen as illegal.

It was through a Welsh priest, Willian Price, that the process of legalizing the act of cremating the deceased began –

After being caught cremating the remains of his first child, he argued in court that the law did not state that cremation was illegal or legal at all. This led to the Cremation Act 1902, which stated several requirements before a cremation could take place, as well as the only authorized places where it could occur.

CremationThe first “official” cremation after the passing of this act was the cremation of the body of Mrs. Jeanette C. Pickersgill in 1885. Mrs. Pickersgill was an Amsterdam-born, English painter well-known in several circles in society. Two more cremations followed in that year, followed by ten in the next year. The practice soon spread to other countries and several other crematoriums were built.

In modern times, a crematorium could be housed within a chapel, funeral home, or operate independently. It’s good to note that cremation of multiple bodies at a time is still illegal in the United States and many other countries. A cremator can only cremate one body at a time. The exceptions that fall apart from this law is if the bodies to be cremated are still-born twins or other multiples or mothers who have died in childbirth with their still-born babies. In these cases, the bodies must be incinerated in the same container.

Modern cremators are now computer controlled, which is deemed safer and easier to use than manually lighting the device. Some will even allow the deceased’s family members to view the cremation taking place inside, mostly for religious reasons (such as in Hinduism and Jainism). The urns where the ashes are kept could be of any design and of any material. Traditional funeral services could also be held after the ashes have been transferred to the urn.

 

Here we are giving the history of traditional funeral services and cremation process. Visit Our Gentrygriffey.com for more information about Cremation.

PCB Fabrication: Do’s, Don’ts And Other Things To Include On Your Checklist

PCB

Beginners in PCB fabrication often find it difficult to find a starting point. This is because creating a printed circuit board often entails a lot of processes. Fabricators also have to make sure that they take note of even the smallest details of the process in order to minimize errors.

For those who are engaged in the fabrication of PCBs purely as a hobby, they can create a checklist that lists down what to do and what not to do during the fabrication process.

This checklist could include the following items:

 

1) The type of PCB that they would be designing.

First-time PCB fabrication hobbyists are often advised to only create designs for single-sided PCBs. This schematic diagram for this type of PCB is easy to design and does not require a lot of junctions and symbols and stuff like that. However, those hobbyists who are already a bit confident of their skills in creating PCBs can also engage in creating double-sided PCBs.

 

2) The clearance that would be placed between each of the PCBs conductor tracks.

This is an important part of the PCB fabrication process because it determines whether the finished product will have functional failures or not. Hobbyists have to calculate the distance properly, as well as arm themselves with a clear understanding of the in-depth rules for voltage differences and conductor clearance.

Hobbyists also have to take note that the safety standards for most industrial products dictate that devices with 40-volt mains should have a minimum clearance of at least 8mm. There are many other things that have to be taken into consideration in terms of voltage and clearance, which is why hobbyists have to take the time to do some research.

 

3) The thickness of the substrate coating between each of the PCB’s layers of copper laminate.

This is more applicable for hobbyists who plan to create double-sided or multi-layer PCBs. The thickness of the substrate also depends on a lot of factors. Those who are unsure on how to choose the proper thickness of a PCB substrate can simply order a ready-to-use base board.

They can order the standard-sized PCB substrate that is 0.063 inches thick, or they can also seek the advice of knowledgeable staff members when it comes to choosing the right thickness of the copper laminate that is suitable for the PCB design.

Another factor to take into consideration before undertaking the PCB fabrication process is the type of etching process to use for transferring the design pattern onto the copper laminate.There are various ways to achieve this, including:

 

4) Transferring the design on the copper laminate via a silk screen printer.

This involves using high quality ink for transferring the design through a mesh onto the laminate. This is one of the oldest methods of transferring a design onto another item. This process is best used by hobbyists who have the patience for painstakingly drawing the tiniest details of the circuit design on the mesh or silk screen fabric.

Although there have been several modern methods of stenciling a design on a silk screen mesh printer, these methods still involve a lot of work.

 

5) Transferring the design through a method known as isolation milling.

PCB Fabrication

This design transfer method is also referred to as a subtraction method. This is because it involves slowly chipping away parts of the copper laminate in accordance with how the circuit pattern is designed.

One advantage of this method is that it does not require the use of any harmful chemicals for making the circuit design stick on the copper laminate.

There are many other etching methods that hobbyists can choose from. All they have to do is to decide on which method to use and to prepare all the necessary tools that the method requires.

 

PCB fabrication and assembly is a methodology which makes the PCB components mounted and soldered in the printed circuit board.

Tips on Selling Your Hamptons Real Estate

Located on the eastern end of Long Island, The Hamptons is a group villages that are located in the towns of Southampton and East Hamptons, thus their name. The area is well known for its popular seaside resorts and is one of America’s historical summer colonies. Its popularity for being a seaside summer destination makes it one of the most expensive residential properties in the United States. This makes it a highly lucrative piece of real estate and a difficult one to sell due to it being one of America’s most expensive real estate. However, there are tips on how one can sell a piece of Hamptons real estate.

 

Make your property stand out from the rest

 

One of the best ways to sell anything in the market is to make it unique among the competition. The same is definitely true for real estate. There are several ways to make it stand out like decorating your roofs or having unique plants in your garden. You can also resort to great landscaping of the lot. One can also use unique colors that would make it easily stand out. However, it must blend in well with the rest of the landscape and its surrounding community.

 

Make sure everything in your property is fixed

Property

 

If you really want people to buy your Hamptons real estate, it is then important that everything in your property must be in perfect working condition. You must fix all the broken utility lines like the electric cables and the water lines. You must also patch up any physical damages on your home like scratches, dents, missing tile pieces, and broken door knobs. You must also make your home compliant to the areas building codes as to assure the safety of the property’s potential occupants.

 

Take photos of your property and post it online

 

Selling Hamptons real estate, just like with property from other places, is a game of show, don’t tell. So, it is necessary that you must have something to show to prospecting buyers and the best way to show your property is through pictures. Now, before you take a photo of your property, make sure that it can be properly captured on photographs. The photos should be ready for posting online for people generally or buyers specifically to see. You can have it posted in a real estate site or if you want a greater reach, you can post it through social media.

 

Clean and de-clutter your property

 

The last thing any potential buyer wants in a property being sold is dirt and clutter. No one wants to have the keys to a house that is full of dirt and unnecessary stuff that only consumes space. You must then remove everything that is simply unnecessary for the prospecting buyers like your big cabinets or the frame of your bed. They only consume space, which make rooms look smaller. Chances are, these buyers do have their own furniture with them. You must also make an effort to clean your property of every dirt, dust, and spider web that clutter your property.

 

Get to know your competition

 

It is already tough to sell a piece of property to a client in itself. It is made even tougher when you think about your competitors doing the same thing. The only way to beat the competition is to know what your competition is offering and what he has up his sleeves. The Hamptons is a highly priced, affluent residential area that holds lucrative prospects for anyone who wishes to earn from selling Hamptons real estate. Bagging more deals than your competitors will no doubt prove to be profitable for you.